The calculator below can help to determine how many
evacuated tubes you require given your energy requirements.
Solar collectors come in a set of standard sizing of 10,
20, 22 or 30, depending on your region. Of course you can
also combine collectors to increase the size. If you get an
answer that is not a standard size, as a general rule,
select the next size down - this will prevent having too
much heat in the summer.
Depending on your preference, either Metric or Imperial
values may be used to calculate the number of tubes
required. Please note: 1 kWh/m2/day = 317.1 Btu/ft2/day
*Water Volume = This should represent the actual volume of
hot water used at the tap in total each day. Although most
hot water systems have target temps of 60oC / 140oF, when
showering a temperature of between 42oC / 107oF and 45oC /
113oF is normally used. Therefore 300L of hot water at the
tap may only draw 220L of hot water (at 60oC / 140oF) from
the storage tank.
**Temperature Rise = target tap hot water temp - average
mains cold water temp. Target hot water temp should usually
be around 42oC / 107oF to 45oC / 113oF Cold water usually
fluctuates by about 10oC / 18oF between winter and summer.
A check of your local weather records should provide you
with an idea of average cold water temperatures (normall
about 10oC / 50oF in winter and 20oC / 68oF in summer, in
mild regions).
The estimations above are just a guide and are based on a
average summer performance level of 70%. As explained above
it is best not to oversize the system. Your local
distributor may need to complete a onsite inspection to
accurately assess your requirements and design a solar
water heating system which suits your needs.